CDLCombination VehiclesClass APermit Test

CDL Combination Vehicles Test: 5 Real Questions and Answers Explained

Five real CDL combination vehicle test questions explained: stopping distance, jackknifes, following distance and trailer air lines.

August 13, 2026 · Commercial Driver Prep team
CDL Combination Vehicles Test: 5 Real Questions and Answers Explained

If you want a Class A license, the Combination Vehicles test stands between you and your permit. It’s one of three written tests you have to pass, alongside General Knowledge and Air Brakes. It’s also the one that catches the most people off guard, because the questions are not all about trailers.

Below are five questions of the type that appears on the real exam, with the reasoning behind each answer. Memorizing the letter won’t help when the DMV rewords the question. Understanding the rule will.

What the combination vehicles test actually covers

The questions come from Section 6 of the CDL Manual (Combination Vehicles). The test also borrows from Section 2 (Driving Safely) and Section 5 (Air Brakes), so expect a following-distance or air-pressure question in the middle of your trailer questions.

TestCDL Manual sectionNeeded for Class A permit?Passing score
General KnowledgeSections 1–3Yes80%
Air BrakesSection 5Yes80%
Combination VehiclesSection 6Yes80%

Remember: The three tests overlap. Study them together and each one gets easier. Our guide to how to pass the CDL permit test on the first try shows how to sequence them.

Question 1: Which takes longer to stop, a loaded or an empty vehicle?

Answer: the empty vehicle.

This one feels backwards, which is exactly why it’s on the test. A tractor-trailer is built to carry up to 80,000 pounds. The brakes, tires, and suspension are all designed around that weight.

  • Loaded: the weight presses the tires into the pavement, so the brakes have traction to work with.
  • Empty: the stiff suspension lets the trailer bounce, the tires lose grip, and the wheels lock up more easily.

The CDL Manual puts it plainly: empty trucks require greater stopping distances because an empty vehicle has less traction.

Did you know? The Manual also warns that a fully loaded rig is 10 times more likely to roll over in a crash than an empty one. Loaded trucks stop better but tip more easily. Both facts are fair game on the test.

Question 2: At what angle does a jackknife occur?

Answer: 15 degrees.

This is a straight memorization question that shows up in combination vehicle question banks. Once the angle between the tractor and the trailer passes roughly 15 degrees in a skid, the trailer is swinging around and you are in a jackknife. The tractor and trailer fold toward each other in an L shape.

The Manual itself focuses less on the number and more on what you do about it:

  1. Recognize the skid. Check your mirrors any time you brake hard. A trailer skid shows up there first.
  2. Release the brakes to get traction back.
  3. Do not use the trailer hand brake to straighten out. The trailer wheels locking is what caused the skid in the first place.

Once the trailer wheels grip the road again, the trailer starts to follow the tractor and straightens out.

Question 3: A 60-foot vehicle is traveling at 45 mph. What is the proper following distance?

Answer: 7 seconds.

This is a General Knowledge formula from Section 2 of the Manual, and it shows up on the combination test regularly. Learn the formula, because the examiner can change the numbers any way they like.

  • 1 second for every 10 feet of vehicle length
  • Add 1 second if you are traveling over 40 mph
Vehicle lengthSpeedCalculationFollowing distance
60 feet45 mph6 + 17 seconds
50 feet30 mph5 + 05 seconds
40 feet35 mph4 + 04 seconds
40 feet55 mph4 + 15 seconds

Tip: Read the speed first. If it’s over 40 mph, write “+1” on your scratch paper before you do anything else. Most wrong answers on this question come from forgetting the extra second.

For more worked examples of this style of question, see our CDL general knowledge questions and answers walkthrough.

Question 4: What does the trailer air supply control do?

Answer: it operates the tractor protection valve, and in a rapid air loss it causes the trailer emergency brakes to apply.

The trailer air supply control is the red, eight-sided knob on the dash. Here is how the system fits together:

  • The air compressor and main tanks are on the tractor. The tractor makes all the air.
  • Push the red knob in and air flows back to fill the trailer tanks and release the trailer’s emergency brakes.
  • Pull it out and the air supply is shut off, which applies the trailer emergency brakes.

The key safety feature is that if the trailer develops a major leak, such as a blown hose or a damaged brake chamber, the knob pops out on its own. The CDL Manual gives the range as 20 to 45 psi. The tractor protection valve closes, the tractor keeps its remaining air, and the trailer brakes come on.

That is also why a daily air brake check matters. You want to find out the valve works in the yard, not on the interstate.

Question 5: What is the emergency air line?

Answer: it is also called the supply line. It supplies air to the trailer tanks and controls the trailer’s emergency brakes.

Two air lines run between the tractor and the trailer, and the test expects you to know them by name, color, and job.

LineOther nameColorWhat it does
Emergency lineSupply lineRedFills the trailer air tanks and controls the trailer emergency brakes
Service lineControl lineBlueCarries the brake pedal or hand valve signal to the trailer service brakes

Watch for the trap answers on this question:

  • “Always painted blue” is wrong, because blue is the service line.
  • “A red eight-sided knob” describes the trailer air supply control, not the line.
  • “Used only in emergency situations” is wrong, because the line is supplying air the whole time you drive.

If the emergency line loses pressure, the trailer emergency brakes come on. For the full picture of how these lines connect at the glad hands, read our guide to CDL combination vehicles: rollovers, air lines, coupling and brake checks.

How to study these questions the right way

Notice the pattern across all five questions. Each one tests a rule, and the rule can be rephrased a dozen ways.

  1. Learn the reason, not the letter. If you know why an empty trailer stops slower, you can answer any version of the question.
  2. Study the three tests together. Air brake and general knowledge questions appear on the combination test.
  3. Go back to the Manual. Every question traces to a specific section of your state’s CDL Manual, which follows the federal knowledge requirements in FMCSA’s 49 CFR Part 383.
  4. Practice until you score 90% or better. The pass mark is 80%, but nerves on test day cost points.

Practice combination vehicle questions before test day

Five questions are a start, but the real test draws from a much bigger pool. The CDL Test app gives you comprehensive practice for the CDL General Knowledge test and all endorsements, with explanations that tie each answer back to the CDL Manual. It’s part of the Commercial Driver Prep suite of 1200+ questions across 3 focused apps.

Want to see where you stand right now? Try the free CDL practice quizzes on the site, then move into the app for full coverage of the questions behind your Class A permit.

Frequently asked questions

Which written tests do I need to pass for a Class A CDL permit?
For a Class A commercial learner's permit you need to pass three knowledge tests: General Knowledge, Air Brakes, and Combination Vehicles. Each one requires a score of at least 80%. Endorsements such as HazMat, Tank, or Doubles/Triples are separate tests on top of those.
How many questions are on the CDL combination vehicles test?
Most states give 20 multiple-choice questions on the Combination Vehicles test and require 80% to pass, which means at least 16 correct. Check your state's CDL Manual for the exact count, because a few states vary.
Does an empty truck really take longer to stop than a loaded one?
Yes. The CDL Manual says empty trucks need greater stopping distances because an empty vehicle has less traction. The brakes, tires, and suspension are built for a full load, so a light trailer can bounce and lock its wheels more easily.
How do I calculate following distance for the CDL test?
Allow at least one second for every 10 feet of vehicle length at speeds below 40 mph, and add one more second above 40 mph. A 60-foot vehicle at 45 mph needs 7 seconds. A 50-foot vehicle at 30 mph needs 5 seconds.
What is the difference between the emergency air line and the service air line?
The emergency line, also called the supply line, is coded red. It fills the trailer air tanks and controls the trailer's emergency brakes. The service line, also called the control line, is coded blue and carries the signal from your brake pedal or trailer hand valve to the trailer's service brakes.

Put what you've read into practice

Free practice quizzes for CDL, HazMat and Air Brakes — no signup.